Unlike a conventional square, this Carpenter Square rests flat, hands-free on your surface while the foot automatically squares the tool up with the board’s edge, ensuring precise 45 and 90 degree angles.
Best of all, these Carpenter Squares are CNC machined from solid billets of aircraft grade aluminum. Machining it from one piece is the best way to make a precision tool that’ll last a life time.
These One-Time Tools are available in two different sizes, 3-3/4″ (95mm) and 6″ (150mm). Each tool has a 7/32″ thick blade, a 23/32″ wide foot and is engraved with permanent scale markings. Made in U.S.A.
The Carpenter Squares are part of our One-Time Tool program and are made to order.
Order deadline is Monday May 9th.
Tools will ship the first week of July 2011.
Our friend at Black & Decker have done it again! Now is the perfect time for you to do some spring cleaning in your wood shop. Do you have a really old router that is holding on for dear life? One that you have coaxed back from the dead time and time again? It’s time to reward yourself with a NEW & finely tuned machine.
From now through June 30th you can save up to $30 when you buy a Porter Cable or DeWalt wood router. Click here to see our current selection. Save on all of our most popular models, including the router table workhouse Porter Cable 7518 or the fun DeWalt 625. From a smaller Trim Router to 3HP bad boys, we’ve got your router woodworking needs covered. Enjoy!
Rabbets are most commonly created with a table saw or router. Most often they’re cut with router bits that have bearing guides for setting one dimension. Straight bits or saw blades on the other hand have the advantage of allowing you to create any size rabbet you might need.
In either case at least one of the dimensions are reached with a series of trial and error cuts. A better way is to accurately mark off where the finish cuts should be. That’s where the Rabbet Gauges come in.
With these tools it’s very easy to scribe a line on both faces so you have a target to shoot for. In fact if you use a scribing knife you can reduce chipping along the edge. A pencil mark is also a very nice marking option. The trick when using these gauges is to stop your cut just short of the pencil mark. Keep in mind that the steps in the gauges are exactly the finished dimension so the cut should be just at but not into the pencil line.
Three different sizes are available:
- TRG-1614 (1/16″, 1/8″, 3/16″, 1/4″)
- TRG-51612 (5/16″, 3/8″, 7/16″, 1/2″)
- TRG-91624 (9/16″, 5/8″, 11/16″, 3/4″)
No matter if you are scribing or drawing the line, the Woodpeckers Rabbet Gauge makes rabbeting much easier. By providing an accurate, consistent and easy to maneuver gauge for one of woodworkings most common operations, you’re sure to get plenty of use from these fine American made tools.
Each gauge is precision machined from a solid block of aluminum then anodized for durability and engraved with rabbet dimensions.
Please keep in mind that these are One-Time Tools and can only be ordered up until 11:59pm Monday April 11th 2011.
NOTE: Tools are made to order and ship the week of May 23, 2011.
This blog post is probably bitter-sweet for most of you…because only one person could win our “I Love My Router” Giveaway worth over $1,000. The lucky winner is Lloyd Sanders! Lloyd’s Woodworking Router Accessory Prize Package shipped today and we can already forecast the smile that will be on his face as he plays in his wood shop this weekend. Here is a quick photo of the lucky winner:
Want to know the kicker? When we called Lloyd to tell him that he had won, he told us “that’s great!” for two different reasons. First, he had never won anything before! Not a bad way to break that streak if you ask us, he has been woodworking for over 20 years and now he has some FREE new woodworking tools and woodworking accessories to play with. Secondly, it was the same week as his birthday. So from all of us at Eagle America, Happy Birthday Lloyd!
For those of you who didn’t win, “try and try again”. Keep your eyes on your inbox, we hope to run another giveaway contest sometime soon.
Today is your lucky day! Our St. Patrick’s Day Savings are starting early this year. Click over to Eagle America today and save on shipping right now. Need some new router bits, router accessories, saw blades or shaper cutters? Now is the time to order…but act fast. Our St. Patty’s Shipping Sale ends 3/20/2011. Tell your woodworking friends, they might just say you are the leprechaun that showed them the pot o’ gold at the end of the woodworking rainbow. OK, maybe that was a bit much…have a nice weekend!
Introducing Woodpeckers precision machined aluminum Combination Saddle T-Square. A handy NEW tool that makes accurate marking easier than ever.
By combining the benefits of a saddle square with the precision of a T-Square you have the best of both worlds. The saddle squares features makes it possible to draw razor accurate lines on both the face and edge of your work piece without having to move a thing. Imagine how much simpler it will be to cut a board to length when you can see the line from two sides.
Now imagine being able to instantly place your pencil an exact distance from a board’s edge and draw a perfectly straight line while maintaining that exact distance. That’s made possible by a series of perfectly machined, 1 mm diameter holes spaced 1/32″ apart (1 mm spacing for the metric version). Say hello to super accurate layouts and better joinery!
These new Saddle T-Squares are 2.9″ wide with a 3/4″ long saddle. They are available in two styles, imperial or combination imperial and metric. Either style is available in a 4″ (100mm) or 6″ (150mm) length. Made in USA!
Your chance to order one of these unique tools ends midnight March 21.
Click here to order now!
This “One-Time Tool” is part of our one-time production run program. So get yours now because when they’re gone, they’re gone!
NOTE: Tools are made to order and ship the week of April 18.
The Eagle America Spline Jig was designed for your table saw to save you time and help you safely create strong, decorative joints. Used when making fine furniture, picture frames and boxes, spline joints are one of the most beautiful methods of joinery used in woodworking.
You can use contrasting wood tones or various spline thicknesses to create decorative accents. Spline joints are not only attractive but they feature extra gluing surfaces when compared to a plain joint, making them one of the strongest joints you can make.
The jig measures 12″ W x 24″ L and features an embedded t-track with two stop blocks. Use both stop blocks to sandwich and cut splines in narrow projects, one stop block to clamp and index cuts on medium sized projects or remove both stop blocks for larger projects such as boxes.
The base of the jig is made from durable 1/2″ HDPE which creates a smooth, non-marring surface that slides easily across your table saw top. The adjustable 18″ miter bar will fit in any standard 3/4″ miter slot. Made in USA!