Archive

Posts Tagged ‘sharpening’

It’s All a Pile of Junk

April 11, 2011 3 comments

*** This post is courtesy of Tom Iovino of Tom’s Workbench ***

A few years ago, a colleague of mine at work stopped me in the hallway. She had just returned from an extended leave of absence due to the passing of her father. “Tom, I don’t know if you know this, but my dad was a woodworker.  We have his collection of tools, and I was wondering if you wanted to take a look at any of them for your workshop.”

What treasures would Tom find?

Wow.  I was floored.  That was quite an honor to be considered to receive something so precious from my coworker’s dad.  I told her I would come out and, even if I didn’t take anything, I would help give her an idea of what each of the tools was worth.  I drove to her condo that weekend and she led me to a storage shed for her unit.  As she cracked the door to the shed, I have to confess that my mind raced with the thought of being able to expand my meager tool collection and fill some needs in my shop.  The reality was quite different.  As we pulled tools out of the shed, they were caked with years of rust.  Insects had taken up residence in warped 1970s vintage plastic cases.  Wooden handles on tools were cracked, warped and, in some cases, completely falling off.

Tom was shocked at what he found, such a shame

“What happened?” was the question that raced to my mind – and reflexively slipped from my lips. My coworker said that her dad was slowing down in his old age, and the neighbors were afraid he might hurt himself working with the tools.  So, they took them to an old barn and just let them sit for about a decade. Apparently, the barn wasn’t as weather tight as they had expected. No one ever checked on them… decided to put them up for auction… or cared for or maintained them.  I told her that if there was something special from his shop (there was a well-worn square that was protected in a case), she should save it as a memento, and that the rest of the stuff was just too far gone to salvage.

A little Tool Care and Maintenance could have saved this collection from a trip to the junk yard

As I drove home feeling disappointed – at the tools and myself for being a jerk – my thoughts turned toward my own collection of tools.   How could I prevent my tools from ending up like those poor, rusty specimens?  That’s when I decided to throw myself into the maintenance mindset.  It doesn’t take hours of slavish devotion to keep your tools in tip-top condition.  Actually, I follow a pretty simple regimen to help keep my investment shiny new and working great.

Clean

Shop cleaning is such a turn off for many woodworkers.  I mean, wouldn’t you rather be in the shop creating beautiful pieces of work than scrubbing the teeth of your table saw gears with a toothbrush?  Yet, simply using proper dust collection, vacuuming dust from your tools and scraping off any dry glue beads from your clamps can keep them working like new for years.

Sharpen

Woodworking is mostly about making big pieces of wood into smaller ones, then – in many cases – figuring out how to attach them to other pieces to build a project.  None of these tools works well if they aren’t clean and sharp. Plane irons, router bits, chisels, table saw blades… they all deserve good treatment.  Not only will your work look cleaner, but sharp tools are safer and put less strain on power tool motors.

Protect

In Florida, I’m always battling humidity and I sharpen my tools with water-lubricated diamond stones. I always make sure my tools are dry before I store them, and I keep a rag dipped in furniture paste wax nearby to wipe them with to keep rust at bay.  There are lots of products out there to help you get rust off your tools or to put a barrier up to prevent it from forming in the first place.

I once read a comment by a woodworker as to what he hopes happens to his tools after he passes.  “I want my children to fight over them like ravenous jackals battling over a zebra carcass on the Serengeti.”  While I hope my two sons have better manners,  I hope one day they find the tools in my shop in good shape and ready to help them if they would like.

*** Specials thanks to Tom Iovino, a true Shop Monkey,  for this post.  He will be providing posts on a monthly basis for Eagle America, check back again soon. ***

Sharpening Router Bits

January 6, 2011 Leave a comment

Simply put, woodworkers are busy people.  If woodworking is your profession (you lucky dog!) then you practice the craft from 8am to 5pm all week-long and often on weekends.  If woodworking is your hobby, you probably work all week and try to carve time out for your projects at night and on the weekends.  Long story short, you probably don’t want to slow down to sharpen all of your tools…especially your router bitsThis recent post on LumberJocks.com caught my attention…and since we are “The World’s Router Bit & Woodworking Source” it really caught my eye.

Pocket Diamond Honing Stones are perfect for sharpening your bits

As the article illustrates, you should really own a set of Pocket Diamond Honing Stones as pictured above.  Our 4-Piece set is available for only $29.99 and they are well worth the investment since they can be used to quickly and easily sharpen your router bits, shaper cutters, hand chisels  and other woodworking tools.  We take pride in our router bits, both our domestic Eagle America brand as well as our imported PriceCutter line, and think you would benefit greatly by keeping them in tip-top shape.  All cutting tools, be they table saw blades, router bits or shaper cutters, are designed to give you optimal performance when they are nice and sharp.  Will you make a Woodworking New Year’s Resolution to sharpen your tools every time you are done using them?  It could be just a quick pass or two with the honing stones, it doesn’t have to be hours of work.  That way your tools are ready to go the next time you need them.  Is that practical or just wishful thinking?  Let us know what you think.

What’s Old is New Again!

October 27, 2009 Leave a comment

George writes:

I stopped at a garage sale a few days ago and found a wood chisel that had been severely abused and probably used on everything other than wood. I paid a dollar for the chisel, made in Sweden, took it home and turned a frog into a prince using the Worksharp sharpening system.

  

The Worksharp is a beautiful sharpening tool that can recondition your chisels or hand plane blades back to their original sharpness and then some. The Worksharp is also great for small touchups and maintaining your tools so you will never have to worry about pulling a dull tool out of you drawer or rack again.

  

I would highly recommend this affordable sharpening station to anyone!

It pays for itself in no time!

Follow

Get every new post delivered to your Inbox.